Home
Sitemap
Welcome
FAQ
- Application
- Q1. The colors are not correct.
- Q2. I measured a chart by using a colorimeter, but the color values are not accurate.
- Q3. If I changed a color by using the Alternative Color function, would it affect the overall color of the picture?
- Q4. What is a profile?
- Q5. What is an RGB profile?
- Q6. What is a CMYK profile?
- Q7. What is an output profile?
- Q8. What is a device link profile?
- Q9. I can't print MS-Office files using PageScope Direct Print. What should I do?
- Q10. The correct IP address is entered, but I cannot view the content of the PageScope Web Connection.
- Q11. Now operating remotely is displayed on the screen and the machine cannot be operated.
- Q12. How do I access Web Utilities?
- Q13. Can I operate the main body's touch panel screen remotely from a computer?
- Settings and Adjustments
- Q1. Can I change the screen displayed first when the machine is turned on?
- Q2. Can I make a Hold Job be automatically deleted after a certain amount of time has elapsed?
- Q3. Can I change the placement of the function keys (Paper Setting, Adjustment, etc.) at the bottom of the MACHINE screen?
- Q4. I forgot the password for the password-protected hold job and HDD saved job, and now I can't delete them.
- Q5. I can't set the weekly timer.
- Q6. No information sound is released when the machine stops due to mishandled paper.
- Workflow
- Q1. When printing, how can I reduce the amount of paper conveyed before printing?
- Q2. What is the specification of data layout when printing.
- Q3. How much space is inserted between printed pages?
- Q4. When printing a test page, I want to check the image before it is wound on Roll Winder RW-201.
- Q5. What is the maximum distance that I can print continuously?
- Others
- Q1. Can the main body's touch panel screen be operated using a mouse?
- Q2. Can I change the printing conditions of a job after it has already started printing?
- Q3. Do I need to stop the job if I were to replace the toner bottle while a job is being printed?
- Q4. Can I use an external keyboard for password entry or any other entry of information?
- Image Controller
- Color Centro : Application of Image Controller for color management.
Application
- Color Centro : Application of Image Controller for color management
- Overview of Color Centro
- Set up Color Centro
- Basic Information of Color Centro
- Color Management with Color Centro
- Calibration
- Tone Curve Adjustment
- Tone Curve Adjustment Screen
- Operate on the Tone Curve Adjustment Screen
- Spot Color
- Spot Color Screen
- Operate on the Spot Color Screen
- Load of a Spot Color Table
- Create a Spot Color Table
- Selection and Addition of a Spot Color
- Add a Spot Color that is Measured by using a Colorimeter
- Adjust a Spot Color Manually
- Adjust a Spot Color by using a Printed Chart
- Save a Spot Color Table
- Change the Priority of a Spot Color Table
- Management of Spot Color Tables
- Management of Spot Colors
- Search for a Spot Color
- Reset the Screen
- Alternative Color Management
- Profile Management
- Profile Management Screen
- Management of RGB Source Profiles
- Management of CMYK Target Profiles
- Creation of a CMYK Target Profile
- Management of Printer Profiles
- Creation of a Printer Profile
- Management of RGB-CMYK Device Link Profiles
- Creation of an RGB-CMYK Device Link Profile
- Editing of an RGB-CMYK Device Link Profile
- Management of CMYK-CMYK Device Link Profiles
- Creation of a CMYK-CMYK Device Link Profile
- CMYK-CMYK DLP (Creation): Start Color Centro Profiler
- CMYK-CMYK DLP (Creation): Select Profiles
- CMYK-CMYK DLP (Creation): Specify Color Conversion
- CMYK-CMYK DLP (Creation): Enter a Profile Name
- CMYK-CMYK DLP (Creation): Confirm the Result of the Calculation
- CMYK-CMYK DLP (Creation): Select a Task
- CMYK-CMYK DLP (Creation): Feed Back Measurement Values
- CMYK-CMYK DLP (Creation): Complete the Procedure
- Editing of a CMYK-CMYK Device Link Profile
- Color Default Settings
- Color Configuration Management
- Profile Set
- Color Configuration
- Color Configuration Management Screen
- Create a Color Configuration
- Edit a Color Configuration
- Register a Color Configuration
- Management of Color Configurations
- Creation of a Profile Set
- Editing of a Profile that Composes a Profile Set
- Improvement of Accuracy of a Profile Set
- Adjustment of Color Conversion of a Profile Set
- Management of Profile Sets
- Specify Environment on Color Centro Profiler
- Other Functions
- PageScope Web Connection : Web Tool of Image Controller
- Overview of PageScope Web Connection
- Accessing PageScope Web Connection
- Configuration of User Mode Screen
- Configuration of Administrator Mode Screen
- Maintenance Tab
- Security Tab
- Printer Setting Tab
- Network Tab
- Web Utilities : Web Tool of this machine
- Overview of Web Utilities
- Remotely Controlling and Monitoring Machine
- Setting Up Remote Panel / Remote Monitor / Multi Monitor
- Setting Up Real-time Remote Panel
- Installing Web plugin
- Enabling VNC Function of the Machine
- Setting Connection to VNC Viewer
- Remote Panel Advanced Settings
- Remotely Controlling Machine (Remote Panel)
- Remotely Monitoring Machine (Remote Monitor)
- Remotely Monitoring Multiple Machines (Multi Monitor)
- Transferring Setting Data
- Displaying Job History
- Saving Colorimetric Data to Main Body
Job Operations
Settings and Adjustments
- Initial Settings and Adjustments
- Prepare and Adjust Printer Functions
- Overview of Printer Functions
- Procedure of Setting Computer for Printing
- Operating Environment
- Setup Procedure
- Before Installing the Printer Driver
- Install the Windows Printer Driver
- Install the Macintosh Printer Driver
- Installation When Using NetWare
- Uninstalling (Deleting) the Printer Driver
- Prepare and Adjust Printer Functions
- Adjustments
- Function Overview
- List of Adjustment Menu Items
- Machine Adjustment
- Printer Adjustment
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction in the Printer
- FD-Mag. Adjustment: Adjusting the Magnification in Paper Feed Direction in the Printer
- CD-Mag. Adjustment: Adjusting the Magnification in Crosswise Direction in the Printer
- Stop Immediately Timing Adjustment: Adjust the timing for Stop Immediately
- Printer Adjustment
- Execute Adjust Operation: Adjusting in Adjustment Mode
- Density Balance Adjustment
- Applied Density Balance Adjustment Data
- Registering Colorimetric Data for Automatic Adjustment
- Outputting the Density Balance Chart
- Measuring the Colorimetric Data for Density Balance Chart Using the Spectrophotometer
- Registering Colorimetric Data in the Machine
- Entering New Density Balance Adjustment Data for Manual Adjustment
- Manually Adjusting the Existing Density Balance Adjustment Data
- Duplicating or Deleting Density Balance Adjustment Data
- Enabling or Disabling Density Balance Adjustment Data
- Maximum Density Adjustment: Adjusting the Maximum Density for Y, M, C, and K
- Utility/Counter
- List of Setting Items
- User Setting
- System Setting
- Language Setting: Selecting the Language to Be Used for Display
- Unit Setting: Selecting the Unit for Values
- Paper Feed Setting
- Reset Setting
- Default Screen Setting: Selecting the First Screen to Be Displayed
- Power Save Setting
- Date/Time Setting: Setting the Date and Time
- Operation/Info. Sound Setting
- Key Response Time: Setting the Key/Button Response Time
- Service Port Device Setting: Selecting Whether or Not to Use a Service Port Device
- Mouse Setting: Various Settings When a Mouse is Connected
- Common Setting: Setting the Various Operations of the Machine
- Print Setting
- System Setting
- Administrator Setting
- System Setting
- Power Save Setting
- Date/Time Setting: Setting the Date and Time
- Weekly Timer Setting
- Operation Procedures for Weekly Timer (Limiting Usage Time)
- Weekly Timer ON/OFF Setting: Selecting Whether or Not to Use Weekly Timer
- Timer Setting: Setting the Machine ON/OFF Times
- Date Setting: Setting the Timer ON/OFF Dates/Days
- Select Time for Power Save: Setting the Time to Turn Off the Machine
- Password Non-Business Hours: Setting the Password for Using the Machine in Non-business Hours
- Expert Adjustment
- Printer Adjustment
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction in the Printer
- FD-Mag. Adjustment: Adjusting the Magnification in Paper Feed Direction in the Printer
- CD-Mag. Adjustment: Adjusting the Magnification in Crosswise Direction in the Printer
- Print Job JAM Setting: Setting the Detection of Paper Jam Caused by Misalignment
- Print Start Distance Setting: Specify the Print Start Distance
- Continuous Job Space Setting
- Process Adjustment
- Quality Adjustment
- Execute Adjust Operation: Executing Adjustment Operations
- Printer Adjustment
- List/Counter: Save Lists on a USB Flash Drive
- Operation Screen Customize
- Administrator Registration: Registering Administrator Information
- Network settings
- NIC Setting: Setting the Machine Network Information
- E-Mail Initial Setting: Setting the E-mail Information
- http Communication Setting: Setting the http Communication Information
- Quick Security Setting
- Quick IP Filtering: Restricting Access to the Machine
- Administrator Password: Changing Administrator Password and Turning On the Administrator Authentication Function
- Password Rules Setting: Enabling Password Rules
- Web Utilities Setting: Selecting Whether or Not to Use Web Utilities
- PSWC Setting: Selecting Whether or Not to Use PageScope Web Connection
- Security Warning Display: Selecting Whether or Not to Display the Security Warning
- Common Setting: Setting the Various Operations of the Machine
- System Connection
- Security Setting
- Administrator Password: Changing the Administrator Password
- HDD Management Setting
- Delete Temp. Data Setting: Allowing the Overwriting of Temporary Data
- Delete All Data Setting: Setting the Erase Mode for Overwriting All Data for Deletion
- Delete Hold Job: Deleting Jobs on Hold
- Delete HDD Job: Deleting Jobs Saved on HDD
- HDD Restore/Backup: Backing Up and Restoring HDD Data
- Hold Job Auto Delete Period: Setting the Time for Automatic Deletion of Hold Jobs
- Controller Administrator Setting
- System Setting
- Touch Panel Adjustment: Checking the Touch Panel Response
- Quick Security Setting
- Displaying the Quick Security Setting Menu Screen
- Quick IP Filtering: Restricting Access to the Machine
- Administrator Password: Changing Administrator Password and Turning On the Administrator Authentication Function
- Password Rules Setting: Enabling Password Rules
- Web Utilities Setting: Selecting Whether or Not to Use Web Utilities
- PSWC Setting: Selecting Whether or Not to Use PageScope Web Connection
- Security Warning Display: Selecting Whether or Not to Display the Security Warning
- When the Security Warning Display screen is displayed
- Check the Counter
Machine Information
- MACHINE Screen
- MACHINE Screen (touch panel of the machine)
- Paper Setting
- Registration Adj.
- Adjustment
- Controller Setting
- CONTROLLER: Setting the Controller
- Register/Delete Paper Setting
- Web Tool of Image Controller
Workflow
- Before Printing
- Power Switches of the Machine
- Prepare the Machine
- Pre-output Image Position Adjustment
- Pre-output Image Quality Adjustment
- Items to Adjust and When to Perform
- Screen Selection (Adjustment Flow When Changing the Screen)
- Gamma Automatic Adjustment (Regular Adjustment Flow (High Accuracy/Adjustment Flow When Changing the Screen))
- Density Balance Adjustment (Adjustment Flow When Changing the Screen)
- Maximum Density Adjustment (Regular Adjustment Flow (High Accuracy))
- Controller Calibration (Regular Adjustment Flow (High Accuracy/Adjustment Flow When Changing the Screen))
- Advanced Controller Calibration (Regular Adjustment Flow (High Accuracy/Adjustment Flow When Changing the Screen))
- Registering and Editing Spot Color Information
User Maintenance
Utilize useful functions
- Using HDD to Manage Jobs
- Using Direct Print Function
User's Guides
Configuration
Specifications
Troubleshooting
- Problems Related to Roll Winder RW-101/Roll Winder RW-201
- The status indicator LED does not turn off.
- Pressing READY on the control panel does not enable the solo inching operation.
- Pressing JOG on the control panel does not enable the solo inching operation.
- The media does not rotate well.
- The media wrinkles when the rubber roller is attached.
- The media-break sensor malfunctions.
- Problems Related to Media
- The machine stops with media break
- The machine stops with roll end error
- If a Meandering Has Occurred
- Paper Leans to One Side
- The jam code J-1714 is displayed
- The jam code J-3105 is displayed
- White Spots Appear on the Output Paper
- The media wrinkles
- Tunneling occurs on the thick media
- The media in the feeding section goes out alignment