Home
ApplicationColor Centro : Application of Image Controller for color managementCalibrationOperate on the Calibration Manager ScreenCheck the Calibration Status
ApplicationColor Centro : Application of Image Controller for color managementCalibrationOperate on the Calibration Manager ScreenCheck the Calibration StatusApplication
- Color Centro : Application of Image Controller for color management
- Overview of Color Centro
- Set up Color Centro
- Basic Information of Color Centro
- Color Management with Color Centro
- Calibration
- Tone Curve Adjustment
- Tone Curve Adjustment Screen
- Operate on the Tone Curve Adjustment Screen
- Spot Color
- Spot Color Screen
- Operate on the Spot Color Screen
- Load of a Spot Color Table
- Create a Spot Color Table
- Selection and Addition of a Spot Color
- Add a Spot Color that is Measured by using a Colorimeter
- Adjust a Spot Color Manually
- Adjust a Spot Color by using a Printed Chart
- Save a Spot Color Table
- Change the Priority of a Spot Color Table
- Management of Spot Color Tables
- Management of Spot Colors
- Search for a Spot Color
- Reset the Screen
- Alternative Color Management
- Profile Management
- Profile Management Screen
- Management of RGB Source Profiles
- Management of CMYK Target Profiles
- Creation of a CMYK Target Profile
- Management of Printer Profiles
- Creation of a Printer Profile
- Management of RGB-CMYK Device Link Profiles
- Creation of an RGB-CMYK Device Link Profile
- Editing of an RGB-CMYK Device Link Profile
- Management of CMYK-CMYK Device Link Profiles
- Creation of a CMYK-CMYK Device Link Profile
- CMYK-CMYK DLP (Creation): Start Color Centro Profiler
- CMYK-CMYK DLP (Creation): Select Profiles
- CMYK-CMYK DLP (Creation): Specify Color Conversion
- CMYK-CMYK DLP (Creation): Enter a Profile Name
- CMYK-CMYK DLP (Creation): Confirm the Result of the Calculation
- CMYK-CMYK DLP (Creation): Select a Task
- CMYK-CMYK DLP (Creation): Feed Back Measurement Values
- CMYK-CMYK DLP (Creation): Complete the Procedure
- Editing of a CMYK-CMYK Device Link Profile
- Color Default Settings
- Color Configuration Management
- Profile Set
- Color Configuration
- Color Configuration Management Screen
- Create a Color Configuration
- Edit a Color Configuration
- Register a Color Configuration
- Management of Color Configurations
- Creation of a Profile Set
- Editing of a Profile that Composes a Profile Set
- Improvement of Accuracy of a Profile Set
- Adjustment of Color Conversion of a Profile Set
- Management of Profile Sets
- Specify Environment on Color Centro Profiler
- Other Functions
Check the Calibration Status
The list displays dates and time by paper type and screen type.
Calibration
Exact Color or G7 Calibration
On the [Calibration Manager] screen, click [Check the Status].
The [Confirm all registrations] screen is displayed.
For details about items displayed, refer to Items on the List.
Select a screen from [Screen Settings] in order to display the information for the screen.
Click [Close].
The [Calibration Manager] screen returns.