Home Settings and AdjustmentsCustom Screen: Selecting the Screen Type

Custom Screen: Selecting the Screen Type

Select a screen type to be used for Screen 1, Screen 2, and Stochastic, respectively.

Stochastic, however, is always available.

The screen types have the following features. Use this information as a guide to select an appropriate one.

Screen 1, Screen 2

Type

Description

Line 200

Uses fine lines to reproduce an image. Suitable for office documents including graphs.

Line 180

Uses lines to reproduce an image. Suitable for office documents.

Line 150

Uses lines to reproduce an image. Suitable for black-and-white printing.

Dot 270

Uses ultrafine dots to reproduce an image. Suitable for office documents including graphs and small texts.

Dot 210

Uses ultrafine dots to reproduce an image. Suitable for office documents including graphs and small texts.

Dot 190

Uses fine lines to reproduce an image. Suitable for printing catalogs.

Dot 175

Uses dots to reproduce an image. Suitable for printing color photos.

Dot 150

Uses coarse dots to reproduce an image. Suitable for black-and-white printing.

Dot 130

Uses coarse dots to reproduce an image. Suitable for printing posters.

Stochastic

Type

Description

FM 1

Uses aperiodic dots to reproduce an image. Suitable for printing maps, photos of clothes or textiles finely designed.

FM 2

Uses aperiodic dots to reproduce an image. Enhanced black text reproducibility compared to FM 1. Suitable for printing office documents including black texts.

FM 3

Uses aperiodic dots to reproduce an image. Suitable for printing photos of clothes or fine-design textiles in larger sizes.

  1. Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.

  2. Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Expert Adjustment], [Quality Adjustment], and [Custom Screen] in sequence.

    The [Custom Screen Pattern] screen is displayed.

  3. Select the screen type according to what to print.

    Dot190 is recommended for the Screen 1. We recommended to use Screen1 for usual operation. If necessary, specify the screen setting to Screen 2 or Stochastic according to your printing task.

  4. Press [OK] to complete the setting.

    • To cancel the change, press [Cancel]. In either case, the screen returns to the [Quality Adjustment Menu] screen.

  5. If you have changed the screen type, press [Exit [UTILITY]] on the [Quality Adjustment Menu] screen to return to the [MACHINE] screen.

    The Gamma Adjustment will start automatically.

  6. When the Gamma Adjustment is completed, reenter the Administrator Setting mode and proceed to the Printer Gamma Offset Adjustment for the changed screen type.