The media wrinkles when the rubber roller is attached.
Roll Winder RW-101
If the media set on Roll Winder RW-101 wrinkles, check the following:
Checkpoint | Remedy |
|---|---|
The media is out of alignment (105 mm (±0.25 mm) / 4.13" (±0.01")). | Open the media cover of Roll Winder RW-101 and make sure that the media is set 105 mm (±0.25 mm) / 4.13" (±0.01") away from the inner surface of Roll Winder RW-101. |
Paper stretched in one side is used. | Replace the media. |
Roll Winder RW-201
If the media set on Roll Winder RW-201 wrinkles, check the following:
Checkpoint | Remedy |
|---|---|
The media is out of alignment (105 mm (±0.25 mm) / 4.13" (±0.01")). | Open the media cover of Roll Winder RW-201 and make sure that the media is set 105 mm (±0.25 mm) / 4.13" (±0.01") away from the inner surface of Roll Winder RW-201. |
Paper stretched in one side is used. | Replace the media. |