List of Setting Items

[01 System Setting]

[01 Language Setting]

Select the language used in the touch panel and voice messages.

Language used in LCD: Japanese, Hangul,
Taiwan, Chinese,
English, French, German,
Italian, Spanish

Language in voice message: English, Japanese, OFF

[02 Unit Setting]

Select the unit of measurement for numeric values to be displayed on the touch panel.

mm, Inch (Decimal Point), Inch (Fraction)

[03 Paper Feed Setting]

[01 Paper Setting]

Register or delete the paper settings. Up to 500 can be registered.

Paper Type, Profile Name, Thickness (Weight), Registration Adj., Process Adj., USB Memory Import, USB Memory Export

[02 Weight Thickness Switch Set.]

Switch units when selecting paper thickness.

Weight, Thickness

[04 Reset Setting]

[01 Auto Reset Setting]

The screen selected as the default screen returns after a certain period of inactivity. Select the time interval to activate this function.

OFF, 60 seconds, 120 seconds, 180 seconds, 240 seconds, 300 seconds, 360 seconds, 420 seconds, 480 seconds, 540 seconds

[05 Default Screen Setting]

Select the screen to be displayed when the sub power switch is turned on or Auto Reset is activated.

MACHINE, JOB LIST/Hold Job, JOB LIST/Reserved Job

[06 Power Save Setting]

[01 Power Save Function Setting]
Select the time to activate Auto Low Power and Auto Shut OFF. Also select either Auto Low Power or Auto Shut OFF to be activated when Power Save is pressed on the control panel.

You can also select the condition of Auto Wake-up to activate the machine when a print job is received during Auto Shut OFF.

Auto Low Power: --- min., 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min., 240 min.
Auto Shut OFF: --- min., 1 min., 30 min., 60 min., 90 min., 120 min., 240 min.
Power Save Function: Auto Low Power, Auto Shut OFF
Auto Wake-up Cond.: All Jobs

[02 ErP Setting]

Automatically turn off the main power switch when the sub power switch is turned off, or when Auto Shut OFF or Auto Low Power has been active for a certain time.

Do Not Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, 72 Hours

[07 Date/Time Setting]

Set the current date and time, the daylight-saving time, and the time difference.

Setting Time

Daylight Saving Time: OFF, ON (1 to 150 min.)

Time Zone

[08 Operation/Info. Sound Setting]

[01 Volume Setting]

Specify whether or not to enable the key operation sound or information sound and voice message, and also set the volume when they are turned on.

Operation Sound (Buzzer): ON, OFF,

1 (Small) to 8 (Big)

Info. Sound/Voice (Speaker): ON, OFF; 1 (Small) to 10 (Big)

[02 Info. Sound Item Setting]

Specify each items provided for information sound and voice message.

Repeat Number Setting

　Info. Sound Repeat Number: 1 time, 2 times, 3 times

　Voice Repeat Number: 1 time, 2 times, 3 times

Notice Set for Machine Stop

　Paper JAM: Voice, Info. Sound, OFF

　Paper Differ: Voice, Info. Sound, OFF

　Replenish Toner: Voice, Info. Sound, OFF

　Service Call: Info. Sound, OFF

Other Notification Setting

　Stop Button Acceptance: Voice, OFF

Other Info. Sound Setting

　For System Starting: Info. Sound, OFF

　For Print Job Receiving: Info. Sound, OFF

[09 Key Response Time]

Select the time interval to get the response from the machine when a key is pressed on the touch panel.

Normal, 0.5 seconds, 1 second, 2 seconds, 3 seconds

[10 Service Port Device Setting]

Specify whether or not to use a service port device, and select the keyboard type if the service port device is used.

Service Port Device: ON, OFF

Keyboard Type: EN65, EN104, JP101, JP106, JP109

[11 Mouse Setting]

Select whether or not to use the Wheel Booster function and Cursor Auto Scrolling function, respectively, for when the mouse is connected.

Wheel Booster Setting: ON, OFF

When using this function, set List Scrolling Speed and Value Scrolling Speed.

Cursor Auto Scrolling Set.: ON, OFF

When using this function, set cursor speed, cancel sensitivity, and cursor prior return position, and cursor prior destination.

[02 Common Setting]

[One Shot Message Indication Time]

Select the time span to display a shot message in the message area of the touch panel.

3 seconds, 5 seconds

[Hold Job Status after Output (Default)]

Select the default value to delete or save the data of hold job after outputting.

Delete, Save

[Destination for HDD Recall (Default)]

Select the default destination for the job data recalled from the HDD.

Print, Hold, Print&Hold,

[Banner]

Set to [ON] to elongate the printing area up to 1195 mm/ 47.05".

ON, OFF

[Remaining Memory (Measurement Unit)]

Select the unit of displaying the remaining memory.

%, GB

 [Remaining Memory (Warning)]

Select the percentage at which to give warning when the remaining memory is low.

 5% or Less, 10% or Less

[03 Printer Setting]

[01 Outline Process]

Select the Outline Process for printing.

Text Thinning: Weak+, Weak, Normal, Strong, Strong+

Halftone Text Enhancement: Weak+, Normal, Strong+

FD Lead Edge Density Adjustment: 0 to +5

FD Rear Edge Density Adjustment: -5 to 0

[01 System Setting]

[01 Power Save Setting]

[01 Power Save Function Setting]
Select the time to activate Auto Low Power and Auto Shut OFF. Also select either Auto Low Power or Auto Shut OFF to be activated when Power Save is pressed on the control panel.

You can also select the condition of Auto Wake-up to activate the machine when a print job is received during Auto Shut OFF.

Auto Low Power: --- min., 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min., 240 min.

Auto Shut OFF: --- min., 1 min., 30 min., 60 min.,90 min., 120 min., 240 min.

Power Save Function: Auto Low Power, Auto Shut OFF

Auto Wake-up Cond.: All Jobs

[02 ErP Setting]

Automatically turn off the main power switch when the sub power switch is turned off, or when Auto Shut OFF or Auto Low Power has been active for a certain time.

Do Not Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, 72 Hours

[02 Date/Time Setting]

Set the current date and time, the daylight-saving time, and the time difference.

Setting Time

Daylight Saving Time: OFF, ON (1 to 150 min.)

Time Zone

[03 Weekly Timer Setting]

[01 Weekly Timer On/Off Setting]

Specify whether or not to use the Weekly Timer function.

Weekly Timer ON, Weekly Timer OFF

[02 Time Setting]

Set the ON/OFF times in hours and minutes.

-

[03 Date Setting]

Set the ON/OFF condition of the machine for a given day of a given month.

-

[04 Select Time for Power Save]

Set the machine to turn off and then on during the lunch break.

ON, OFF

[05 Password Non-Business Hours]

Set a password to use the machine by turning on the power temporarily while the machine is in off condition due to the Weekly Timer function.

0000 (4 digits)

[04 Expert Adjustment]

[01 Printer Adjustment]

[01 Centering Adjustment]

Adjust the image position in the crosswise direction of the printer engine.

Prerequisite:

CD-Mag. Adjustment is completed.

Adjustment Range:

-40 (Front) to +40 (Back)

(1 step=0.1 mm)

[02 FD-Mag. Adjustment]

Adjust the magnification in paper feed direction in the printer engine.

Adjustment Range:

-100 (Short) to +100 (Long)

(1 step = 0.01%)

[03 CD-Mag. Adjustment]

Adjust the magnification in crosswise direction in the printer engine.

Adjustment Range:

-100 (Short) to +100 (Long)

(1 step = 0.01%)

[04 Print job JAM Setting]

Set whether or not to stop the machine as a paper jam when a mis-centering is detected. And set whether or not to display a message indicating the cause of the JAM when the machine stops as JAM.

Mis-centering JAM Setting: Detect, Not Detect

JAM Identification Display: Display, Not Display

[05 Print Start Distance Setting]

Specify Print Start Distance Setting.

Print Start Distance Setting: 0m, 2m, 4m(Standard), 6m

[06 Continuous Job Space Setting]

Specify the amount of blank area to be inserted between jobs.

Adjustment Range:

0 to 50

(1 step = 1 m)

[02 Process Adjustment]

[01 Front & Back Density]

Specify the adjustment value for transfer output voltage.

Objects of adjustment:

1st Transfer Y, 1st Transfer M, 1st Transfer C, 1st Transfer K, 1st Transfer (Monochrome), and 2nd Transfer Front

Adjustment Range: -30 to +30

[02 Maximum Density Adjustment]

Adjust the maximum density for each of Y, M, C, and K. The machine will start the Gamma Automatic Adjustment after you change the maximum density. When the Gamma Automatic Adjustment is completed, proceed to the calibration with the image controller.

Yellow: -10 (Light) to +10 (Dark)

Magenta: -10 (Light) to +10 (Dark)

Cyan: -10 (Light) to +10 (Dark)

Black: -10 (Light) to +10 (Dark)

[03 Quality Adjustment]

Adjust the image quality.

[01 Printer Gamma Offset Adj.]

Change the printer gamma curve to adjust the gradation and background density in highlights.

Screen 1 (Y, M, C, K)

Screen 2 (Y, M, C, K)

Contone (Y, M, C, K)

Stochastic (Y, M, C, K)

Adjustment Range: -128 (lighter) to +127 (darker)

[02 Custom Screen]

Select a screen to be used for Screen 1, Screen 2, and Stochastic, respectively.

Screen 1: Dot270, Dot210, Dot190, Dot175, Dot150, Dot130, Line200, Line180, Line150

Screen 2: Dot270, Dot210, Dot190, Dot175, Dot150, Dot130, Line200, Line180, Line150

Stochastic: FM1, FM2, FM3

[03 Controller Image Comp. Set]

Make this setting to smooth the jagged outlines of the text or line images.

Image Compression (1200 dpi): Gradation Priority, Resolution Priority

[04 Tone Curve Each Tag Setting]

Select whether or not to allow tone curve adjustment for each tag (image, text/graphic).

Execute Each Tag Adj., Do Not Execute Adjustment

[04 Execute Adjust Operation]

Execute each of the four adjustment operations manually.

Gamma Automatic Adj., Color Regist. Auto Adj., Toner Refresh Mode, Belt Refresh Mode

[05 List/Counter]

Output the mode memory list or the audit log report. Also, collectively save the data mentioned above on the USB flash drive connected to the USB port.

Mode Memory List, User Management List, Use Management List, Font Pattern List, Audit Log Report

[06 Operation Screen Customize]

[01 Font Weight Setting]

Select the font weight for the screen.

Standard, Bold

[02 Machine Function Key Setting]

Change the layout of function keys displayed on the [MACHINE] screen.

-

[02 Administrator Registration]

Register the name, extension number, and e-mail address of the administrator. The administrator name and extension number are always displayed in the upper-right corner of the [UTILITY] screen.

Admin. Name Setting (up to 8 characters), Extension No. Setting (up to 5 digits), E-mail Address Setting

[03 Network Setting]

[01 NIC Setting]

Configure various NIC settings.

TCP/IP Setting, Netware Setting, HTTP Server Setting, SNMP Setting, SMB Setting, AppleTalk Setting, Bonjour Setting, E-mail Setting, TCP Socket Setting, OpenAPI Setting, Web Service Setting, JSP Setting, IEEE802.1X Authentication Setting, Hot Folder Setting, Detail Setting

[02 E-mail Initial Setting]

Configure initial settings for e-mail or perform transmitting/receiving test.

Use E-mail System: ON, OFF

Time Zone, Trans (SMTP) Mail Server, SMTP Port Number, Trans Mail Server Timeout, New-arrival Check Interval, Receive Mail Server

Receive Mail Server Types: POP3, IMAP , POP3/IMAP Port Number, Receive Mail Account, Receive Mail Password, E-mail Address for Machine

POP (IMAP) before SMTP Auth.: ON, OFF

SSL Encryption of SMTP: ON, OFF

SSL Encryption of POP(IMAP) : ON, OFF

SMTP Authentication: ON, OFF

SMTP Authentication User ID, SMTP Authentication Password

[03 http Communication Setting]

Configure the http communication settings.

Enable Proxy Server: ON, OFF , Proxy Server Address, Proxy Server Port, Enable SSL, Enable Authentication: ON, OFF, Authentication User Name, Authentication Password

[04 Quick Security Setting]

[01 Quick IP Filtering]

Restrict access to the machine by means of IP address (IPv4/IPv6).

Filtering Method: No Filtering, Sync. IP Address, Sync. Subnet Mask

IPv4 Access Range, IPv6 Access Range

[02 Administrator Password]

Set an administrator password for the machine on which the administrator authentication function is set to OFF. The administrator authentication function is automatically turned ON.

Current Password, New Password, Input Confirmation

[03 Password Rules Setting]

Select whether or not to enable the password rules.

Enable, Disable

[04 WebUtilities Setting]

Select whether or not to use the functionality of Web Utilities.

ON, OFF

[05 PSWC Setting]

Select whether or not to use the functionality of PageScope Web Connection.

ON, OFF

[06 Security Warning Display]

Select whether or not to display the Security Setting Warning screen.

Display, Not Display

[04 Common Setting]

[One Shot Message Indication Time]

Select the time span to display a shot message in the message area of the touch panel.

3 seconds, 5 seconds

[Hold Job Status after Output (Default)]

Select the default value to delete or save the data of hold job after outputting.

Delete, Save

[Destination for HDD Recall (Default)]

Select the default destination for the job data recalled from the HDD.

Print, Hold, Print&Hold,

[Banner]

Set to [ON] to elongate the printing area up to 1195 mm/ 47.05".

ON, OFF

[Remaining Memory (Measurement Unit)]

Select the unit of displaying the remaining memory.

%, GB

[Remaining Memory (Warning)]

Select the percentage at which to give warning when the remaining memory is low.

5 % or Less, 10 % or Less

[05 System Connection]

[01 Administrator Call]

Press [Start] to call your service representative via CS Remote Care.

Start

[06 Security Setting]

[01 Administrator Password]

Change the administrator password.

For details about the default administrator password, refer to the Quick Guide.  

[02 HDD Management Setting]

[01 Delete Temp. Data Setting]

Specify whether or not to overwrite the temporary image data on the memory, and also the erase mode for deleting temporary data.

Setting Switch: ON, OFF

Erase Mode: Mode 1, Mode 2

[02 Delete All Data Setting]

Select the desired erase mode to delete all the data on the HDD or the non-volatile memory of this machine. Also execute deleting all the data.

Erase Mode: Mode 1 to 8

Execute Deletion

[03 Delete Hold Job]

Use this function to delete hold jobs.

-

[04 Delete HDD Job]

Use this function to delete the jobs saved on the HDD.

-

[05 HDD Restore/Backup]

Make a backup of, or restore the HDD.

[01 HDD ALL Backup]

Create a backup of all the hold job and HDD job saved on the HDD onto an external storage medium connected to the USB port.

Start

[02 HDD ALL Restore]

Restore the backup data created using [HDD ALL Backup].

Start

[03 HDD BOX Backup]

Create a backup of the jobs in the backup folder of the HDD job onto an external medium connected to the USB port.

Start

[04 HDD BOX Restore]

Restore the backup data created using [HDD BOX Backup].

Start

[05 Controller Backup]

Create a backup of setting data saved on the Image Controller onto an external storage medium connected to the USB port.

Start

[06 Controller Restore]

Restore the backup data created using [Controller Backup].

Start

[06 Hold Job Auto Delete Period]

Set the time when the jobs on hold are automatically deleted.

Not Delete, 12 hours, 1 day, 2 days, 3 days, 7 days, 30 days

[07 Label Conv. Film Count Clear]

This menu is for service engineers.

[01 Quick IP Filtering]

Restrict access to the machine by means of IP address (IPv4/IPv6).

Filtering Method: No Filtering, Sync. IP Address, Sync. Subnet Mask

IPv4 Access Range, IPv6 Access Range

[02 Administrator Password]

Set an administrator password for the machine on which the administrator authentication function is set to OFF. The administrator authentication function is automatically turned ON.

Current Password, New Password, Input Confirmation

[03 Password Rules Setting]

Select whether or not to enable the password rules.

Enable, Disable

[04 WebUtilities Setting]

Select whether or not to use the functionality of Web Utilities.

ON, OFF

[05 PSWC Setting]

Select whether or not to use the functionality of PageScope Web Connection.

ON, OFF

[06 Security Warning Display]

Select whether or not to display the Security Setting Warning screen.

Display, Not Display