Replenishing Toner Supply
When toner supply from the toner bottle becomes less than 1%, the following message will appear in the message area of the screen.
[No toner / Please add toner (K)]
The toner color indicator to be supplied lights in red in the [Consumable/Scrap] indicators area of the [MACHINE] screen.
On bottom right of the [MACHINE] screen, the replenish toner icon is displayed.
When toner supply becomes less than 1% during printing, the current job can be continued (maximum 300 m / 984.24'). Other job cannot be printed unless the toner is replenished.
Jobs can be accepted.
The current job stops when the toner becomes empty.
Toner bottles can even be replaced during printing.
Before changing a toner bottle, be sure to check the toner type number indicated on the front of toner bottle inlet, and use a toner bottle of the same number. Using wrong toner bottles may cause machine trouble.
Put a used toner bottle into the cover that is used for a new toner bottle, and pack it into the packing box. For the subsequent treatment, please contact your service representative.
Do not throw toner or a container that contains toner (e.g., toner cartridge and developing unit) into an open flame. The hot toner may scatter and cause burns or other damage.
Do not leave toner-related parts (e.g., toner cartridge and developing unit) within easy reach of children. Licking any of these parts or ingesting toner could damage your health.
Do not store toner-related parts (e.g., toner cartridge and developing unit) near devices susceptible to magnetism, such as precision equipment and data storage devices, otherwise they may malfunction. They could cause these products to malfunction.
Do not force open the toner-related parts (e.g., toner cartridge and developing unit). If toner tumbles from the toner bottle, take utmost care to avoid inhaling it or even getting skin contact.
If toner lands on your skin or clothing, wash thoroughly with soap and water.
If you inhale toner, move to a place with fresh air and gargle with a lot of water repeatedly. Should you get symptoms such as coughing, seek medical advice.
If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek medical advice if irritation persists.
If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if necessary.
Display the help message on the [MACHINE] screen, and then press [Consumable/Scrap].
Press the [Rep. Toner] tab in the help message area.
Perform the process while using [
][
] to follow the steps.
For details about the help message, refer to Displaying Help Message.
The number of replacements of the toner bottle can be counted. For details, contact your service representative.