Conveying the media
After setting the media to Roll Winder RW-101, main body, and Roll Winder RW-201, always adjust the media tension, and then check the condition of the media by conveying it. For details about the media tension setting, refer to Setting media tension
Before conveying the media, turn on the main power switch and the sub power switch of the main body and the power switch of Roll Winder RW-101/Roll Winder RW-201.
Prepare the machine to print.
For details, refer to Prepare the Machine.
Press [Start Convey] on the [MACHINE] screen on the touch panel of the main body to convey the media.
Check the condition of the media, and press [Stop Convey] on the [MACHINE] screen on the touch panel of the main body.
Pressing STOP on the control panel of Roll Winder RW-101/Roll Winder RW-201 can also stop conveyance.
When replacing the media, convey the media until the interface of the media is wound to the winding shaft of Roll Winder RW-201.
To resume conveyance, press [Start Convey] on the touch panel of the main body.
For details on how to solve conveyance problems such as meandering or mis-centering of the media, refer toProblems Related to Media.