PageScope Web Connection provides the user or administrator mode depending on how to log in.
You can select items as required when logging in.
Item | Description |
---|---|
[Language] | Select the display language. |
[View Mode] | Select [Flash] or [HTML].
|
[User Assist] | Select the [When in warning, the dialog is displayed.] check box to display the dialog box when a warning has occurred or during operation after login. |
If [Flash] is selected in [View Mode], the following items are displayed using Flash.
Status icons and messages
Status of [Device Information] in [Information]
Page display of [Job]
Log in as a public user. In the login screen, select [Public User], and click [Login].
To configure the system or network setting, log in to the administrator mode.
To ensure the security of the data in the administrator mode, make the SSL setting. The SSL setting is included in the [Security] tab settings. For details, refer to Enable SSL.
Select [Administrator], and click [Login].
Enter the administrator password, and then click [OK].
For details about the default administrator password, refer to the Quick Guide.
If you cannot log in with the default password, contact the administrator.
Logging in to the administrator mode locks the control panel of this machine, not allowing you to operate.
Depending on the status of this machine, you may not be able to log in to the administrator mode.
The password entry screen varies depending on the machine settings.