Home Settings and AdjustmentsE-Mail Initial Setting: Setting the E-mail Information

E-Mail Initial Setting: Setting the E-mail Information

Configure the default settings of e-mail.

  • Set this to use CS Remote Care. For details, contact your service representative.

  1. Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.

  2. Press [Network Setting] on the [Administrator Setting Menu] screen, and then press [E-Mail Initial Setting].

    The [E-mail Initial Setting] screen is displayed.

  3. Make a setting for each item.

    • Use the touch panel keypad or the keypad on the control panel to enter numeric values. Press [Set] to highlight the next area for entry.

    • When the DNS server is used, the host name can be entered in the field for mail server (Full path, up to 128 one-byte characters). For more information about how to enter characters, refer to Inputting Characters.

  4. When required entries are completed, run a transceiving test.

    • Pressing [Test] will display the confirmation dialog. Press [Yes] to check that the setting has been made properly.

  5. Press [OK] to complete the setting.

    • To cancel the change, press [Cancel]. In either case, the screen returns to the [Network Setting Menu] screen.