Home Settings and AdjustmentsExecute Adjust Operation: Adjusting in Adjustment Mode

Execute Adjust Operation: Adjusting in Adjustment Mode

Carry out the adjustment operation in Gamma Automatic Adjustment, Color Registration Auto.Adj., Toner Refresh Mode, and Belt Refresh Modes.

Key

Function

[Gamma Automatic Adj.]

Make this adjustment when color reproduction of the whole output is no good.

[Color Registration Auto.Adj.]

Make this adjustment when a gap occurs in heap of YMCK between original and output on consecutive print.

[Toner Refresh Mode]

Make this adjustment for following phenomena.

Rough image

Random small point

Small white circle

[Belt Refresh Mode]

Make this adjustment for the white line in the feed direction and same position for all YMCK colors.

  • These four adjustment operations are the same as those of [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Execute Adjust Operation] of the [UTILITY] screen.

  1. Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.

  2. Press [Execute Adjust Operation].

  3. Select a desired adjustment operation.

    • Multiple selections are available.

  4. Press [OK], then press [Exit [ADJUSTMENT]] on the [Adjustment Menu] screen. After exiting the [Adjustment Menu] screen, the machine starts the adjustment operation.

    • To cancel the operation, press [Cancel].

    The screen returns to the [Adjustment Menu] screen.