Interfaces used for connection
The following types of interfaces are available:
Ethernet
This is used for a computer with network connection.
It supports 1000 Base-T, 100 Base-T, and 10 Base-T standards. In addition, TCP/IP (LPD/LPR, IPP, SMB), Web services, IPX/SPX (NetWare), Bonjour protocols are supported.
USB interface
This is used for a computer with USB connection. The USB interface can be connected to a computer running Windows. A USB cable is required for connection. Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring three meters or less is recommended.
Connection diagram
The printer cables are connected to each port of the image controller.
1. Ethernet port (1000 Base-T/100 Base-T/10 Base-T)
2. USB port