Internal Machine Items
No. | Name | Description |
|---|---|---|
1 | Loop detection sensor | Detects an error of the amount of the media loop. |
2 | Fixing handle | Used to fix the media guide to the feeding shaft. |
3 | Feeding shaft | Sets media. Controls the configured media tension. |
4 | Winding diameter detection sensor | Measures the diameter of the media, and alarm beeps when the media reaches minimum diameter. You can specify the machine behavior when the alarm beeps. |
5 | Paper feed loop fan | Stabilizes the form of the loop. |
6 | Lever | Attaches or detaches the rubber roller to or from the media. |
7 | Guide roller | Conveys the media. |
8 | Roller | Conveys the media. There are three locations: front side, center, and back side. |
9 | Rubber roller | Holds and conveys the media. |
10 | Pull roller | Conveys the media. |
11 | Guide roller | Conveys the media. |
12 | Guide plate | Stabilizes the media conveyance. |
13 | Cutter groove | Cuts the media along the groove. |
14 | Media pressing bar 1 | Holds the media when replacing. |
15 | Media pressing bar 2 | Holds the media when replacing. |
16 | Lug | Fixes the media core to the feeding shaft. |
17 | Lug protruding/retracting handle | Turn to move up and down the lug to fix or remove the media core. |