Home ApplicationIP Filtering

IP Filtering

Click [TCP/IP Setting] - [IP Filtering] in the [Network] tab to display this screen.

This screen allows you to make the settings for IP filtering.

  1. Select [Enable] from the [Permit Access] drop-down list to grant access permissions.

  2. Enter a desired range of the address to be permitted into the [Set] text boxes. Up to 5 ranges can be specified.

    Only one IP address, not a range, can also be specified in three ways.

    Example: Giving permission to 192.168.11.22 only

    192.168.11.22 - 0.0.0.0

    0.0.0.0 - 192.168.11.22

    192.168.11.22 - 192.168.11.22

  3. To deny accesses, select [Enable] from the [Deny Access] drop-down list.

  4. Enter a desired range of the address to be denied into the [Set] text boxes. Up to 5 ranges can be specified.

    In the same ways as giving permission, only one IP address can also be denied.

  5. Click [OK]. Clicking [Cancel] cancels the setting.

  6. Click [OK] on the setting complete screen.