The media does not rotate well.
Roll Winder RW-101
If the rotation of the media set on the feeding shaft is not stable, check the following.
Symptom | Remedy |
|---|---|
The feeding shaft rotates but much paper dust is generated around the lug or feeding shaft. | Tighten the lug protruding/retracting handle. If the media core is damaged, dispose of the media core after the roll end is detected. If you have another winder, rewind the media using a new media core. |
The rotation of the media is unstable only during the slow conveyance before starting printing. | Increase the tension value (kgf) on the touch panel of Roll Winder RW-201 ([Menu] screen - [1,Wind/2,Paper feed] - [2]). |
Roll Winder RW-201
If the rotation of the media set on the winding shaft is not stable, check the following.
Symptom | Remedy |
|---|---|
The winding shaft rotates but much paper dust is generated around the lug or winding shaft. | Tighten the lug protruding/retracting handle. If the media core is damaged, replace it with a new one. |
The rotation of the media is unstable only during the slow conveyance before starting printing. | Increase the tension value (kgf) on the touch panel of Roll Winder RW-201 ([Menu] screen - [1,Wind/2,Paper feed] - [1]). |