Machine Specifications

Type

Console type

Color correspondence

Full Color

Printing process

Quad-drum tandem laser electrostatographic process

Photoconductor

OPC

Developing system

Dry, dual-component reverse magnetic brush developing

Transfer method

Belt/Roller

Fusing method

Belt

Printing resolution:

1,200 dpi (equivalent to 3,600 dpi) x 1,200 dpi

Gradation/Color

256 gradations (8-bit)/16.7 million colors

Paper size

Width 330 mm/ 12.99" (fixed)

*Width 250 mm/ 9.84" (fixed) can be selected. For details, contact your service representative.

Paper thickness (weight) for delivery in the machine

90 μm to 250 μm (81 g/m² to 256 g/m² / 22 lb Bond to 68 lb Bond)

Paper type/thickness (weight)

Non-tack Plain 90 μm to 210 μm (81 g/m² to 176 g/m²/ 22 lb Bond to 47 lb Bond)

Tack Plain 120 μm to 250 μm (136 g/m² to 256 g/m²/ 37 lb Bond to 68 lb Bond

Tack Coated-G 120 μm to 250 μm (136 g/m² to 256 g/m²/ 37 lb Bond to 68 lb Bond

Tack Coated-M 120 μm to 250 μm (136 g/m² to 256 g/m²/ 37 lb Bond to 68 lb Bond)

Tack PP (Synthetic Paper) 120 μm to 160 μm (136 g/m² to 176 g/m²/ 37 lb Bond to 47 lb Bond)

Tack PP Film 120 μm to 160 μm (136 g/m² to 176 g/m²/ 37 lb Bond to 47 lb Bond)

Tack PET Film 120 μm to 195 μm (136 g/m² to 216 g/m²/ 37 lb Bond to 57 lb Bond)

• Only conveyance is guaranteed for non-tack paper.

• Media with film liners are not available.

• Only media with acrylic adhesive are available

• Metallic media are not available.

Thickness

90 μm to 250 μm (including liner for tack paper)

Maximum print range

Main scanning direction: 320 mm/ 12.60"

Vertical scanning direction: 480 mm (1,195 mm for banner)/ 18.90" (47.05" for banner)

*Assured reproduction area is 297 mm/ 11.69" of the center part in the main scanning direction. (238 mm / 9.37" when paper width is 250 mm / 9.84")

Continuous printing speed

High Speed: 18.9 m/min / 62.01'/min

Medium Speed: 13.5 m/min / 44.29'/min

Low Speed: 9.45 m/min / 31.00'/min

The speed after started printing.

Number of copies for continuous printing

1 to 9,999 copies (maximum distance of continuous print is 300 m/ 984.24')

Standard memory

Image memory: 4 GB

System memory: 14 GB

Warm-up time (A time lapse after the sub power switch is turned ON and before the [Ready to print] message appears.)

2 minutes or less (20°C, 50% RH, rated voltage applied)

Power source

Metric area: AC 220 V to 240 V / 20 A, 50 Hz/60 Hz, Inch area: AC 208 V to 240 V / 21 A, 60 Hz

Maximum power consumption

Metric area: 220 to 240 V / 4,700 W, Inch area: 208 to 240 V / 4,900 W (for the whole system excluding the options with a dedicated power code)

Weight

297 kg / 654.77 lb (the machine only)

Dimensions

(Main body) 1,172 mm^*1 (W) 903 mm^*2 (D) 1,041 mm ^*1 (1,478 mm^*3) (H) / 46.14"*1(W) x 35.55" (D) x 40.98" (58.19"*3) (H)

(Main body + Roll Winder RW-101 + Roll Winder RW-201)
3,420 mm (W) x 940 mm (D) x 1,478 mm^*3 (H) / 134.65" (W) x 37.01" (D) x 58.19"*3 (H)

*1: excluding the control panel

*2: including the rear duct

*3: including the control panel

Space requirements

5,160 mm (W) 3,220 mm^*1 (D) / 203.15" (W) x 126.77" (D)

(Main body + Roll Winder RW-101 + Roll Winder RW-201)

*1: With the machine fusing unit pulled out and workspace for Roll Winders on the backside.

Operating temperature

10 to 30°C

Humidity

10 to 80%RH (No dew condensation)