Home Utilize useful functionsSaving/Recalling a Job in/from HDD on the Main Body

Saving/Recalling a Job in/from HDD on the Main Body

Saving in the HDD (Hold Job -> HDD Saved Job)

You can save a hold job as a HDD saved job on the touch panel of the main body.

This section describes an example of creating and saving to a folder at the time of saving a job in the HDD.

  • The original hold job remains as is even after it is saved in the HDD. Delete unnecessary hold jobs if any.

  1. Press [JOB LIST] and press [Hold Job].

    The list of hold jobs is displayed.

  2. Select the job (or jobs) to save in the HDD and press [HDD Store].

    • If the same [File Name] (job name) is in the list, a icon is displayed.

    • mark is displayed for a job which cannot be output.

    • To select multiple jobs, press [Multi-Sel.] and select.

    • To select all the jobs, press [All Select].

  3. Press [New] to create a folder for saving.

    • To save in the HDD root, press [Store] in this screen.

    • To save in an existing folder, select the folder in this screen and press [Store].

  4. In the [New Folder Creation] screen, press [Folder Name].

  5. Enter a folder name and press [OK].

  6. Press [OK].

    • To set a password for the folder, enter in [Password]. A password is not set in this example.

  7. Press [Store].

    When [Received store job] is displayed, press [Close]. The specified hold job is saved as a HDD saved job.

Recalling a HDD Saved Job (HDD Saved Job -> Hold Job)

You can recall the HDD saved jobs as necessary to print or save (copy) as hold jobs.

A HDD saved job contains the setting information of the number of sets. You can change it as desired when recalling it.

  • The original HDD saved job remains as is even after it is recalled.

  1. Press [HDD RECALL].

  2. Press the source folder.

    The list of folder contents is displayed.

    • To recall from the HDD root, select the job in this screen and press [Recall].

    • When you select a folder set with a password, the Password Input screen is displayed. Enter the password and press [OK].

  3. Select the HDD saved job to recall and press [Recall].

    • To select multiple jobs, press [Multi-Sel.] and select.

    • Press [All Select] to select all jobs on the list.

  4. Select the output mode and press [OK].

    To save the HDD saved job as a hold job, select [Hold] or [Print & Hold].

    Item

    Function

    [Print]

    Starts printing. The job is not saved as a hold job.

    [Hold]

    Saves the job as a hold job.

    [Print & Hold]

    Saves the job as a hold job and starts printing.

    The specified HDD saved job is recalled and saved as a hold job.