[Recall]

Specify paper setting using [Recall].

1. Press [Paper Setting] on the [MACHINE] screen.

   

   The [Paper Setting] screen is displayed.

2. Press [Recall].

   

   The [Recall] screen is displayed.

3. Press [] or [] on the [Recall] screen, select a desired paper profile, and then press [Confirm Details].

   The selected entry will be highlighted.

   • If registered specifications do not match with those of the selected tray, that entry will be dimmed to show unavailability. In this case, change the tray to be used.

   

   Details of the selected entry is displayed.

4. When finished with checking, press [Close].

   

5. Press [OK] on the [Recall] screen.

   • The screen returns to the [Paper Setting] screen.

   If you want to change the recalled paper setting, refer to the Change Set, and change the paper setting.

6. Press [Close] on the [Paper Setting] screen.

   [The Paper Profile Name] changes to that of recalled specifications.

   The setting information screen for the leading section is displayed.

7. Change the settings about conditions of rollers of the leading section and whether to [Use] / [Not Use] the ionizer according to the setting information screen, and then press [Close].

   

   

   The screen returns to the [MACHINE] screen.

8. The recalled paper setting is displayed on the [MACHINE] screen.

   • If the registered profile is recalled, appears on the [MACHINE] screen. Press to display the setting information screen for the leading section.

   If you want to change the recalled paper setting, refer to Change Set, and change the paper setting.