Paper Leans to One Side
If paper leans to one side, the edge of media may be damaged or images may be out of alignment.
If paper leans to one side, check the following:
The tension applied on the media is correct.
The media or other parts (such as guides on the roller) are set in the right position
The conveyer section is clean of glue.
Follow the procedures below to solve the problem:
STEP 1: Checking the Media Tension
Check if the tension setting of the media has been made properly.
For details, refer to Setting the tension according to the paper type and thickness (weight).
STEP 2: Checking the Position of the Media and Parts
Check if the media or other parts set in the right position.
For details, refer to Adjusting the Positions of the Media and Parts.
STEP 3: Cleaning the Glue Sticking on the Parts
Clean the media guide and the restriction guide on the leading section if they are dirty with glue.
For details, refer to Cleaning the Leading Section.
STEP 4: Adjust the Position of the Media Guide
If the error persists after the procedure mentioned above is performed, adjust the position of the media guide.
For details, refer to Adjust the Position of the Media guide.
STEP 5: Adjusting the Aligning Roller
If the error persists after the procedure mentioned above is performed, adjust the aligning roller.
For details, refer to Adjusting the Aligning Roller.