NetWare Setting

Click [NetWare Setting] - [NetWare Setting] in the [Network] tab to display this screen.

Configure the network settings to use this machine by connecting to the NetWare environment.

1. To use IPX, select [Enable] from the [IPX Setting] drop-down list.

2. Specify [Ethernet Frame Type] according to your environment.

3. To print data via NetWare, .select an operation mode of the print server from the [NetWare Print Mode] drop-down list.

4. If you have selected [Pserver] for [NetWare Print Mode], specify the following items.

   [Print Server Name]: Enter a print server name.

   [Print Server Password]: Enter a password for the print server as necessary.

   [Polling Interval]: Specify an interval between job queries. The default value is [1] second.

   [Bindery/NDS Setting]: Select [NDS] or [NDS/Bindery]. The default value is [NDS].

   [File Server Name]: Enter a priority file server name in Bindery mode (up to 47 one-byte characters).

   [NDS Context Name]: Enter an NDS context name connected via the printer server (up to 191 one-byte characters).

   [NDS Tree Name]: Enter an NDS tree name connected via the printer server (up to 63 one-byte characters).

5. If you have selected [Nprinter/Rprinter] for [NetWare Print Mode], specify the following items.

   [Print Server Name]: Enter a print server name (up to 63 one-byte characters).

   [Printer Number]: Enter a printer number.

6. Click [OK]. Clicking [Cancel] cancels the setting.

7. Click [OK] on the setting complete screen.

8. If you have changed any setting with an asterisk (*), turn the machine power off then on.