Make various adjustments of Perfect Binder PB-503.
Arrange the strength and visual effects of printouts by adjusting misalignment or glue status of perfect binding.
Screen access
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment]
Setting item | Description |
---|---|
Adjust the alignment width in the vertical direction (crosswise direction) of the body in the sub compile section. | |
Adjust the alignment width in the vertical direction (crosswise direction) of the body in the clamp section. | |
Adjust the alignment width in the fore-edge direction (paper feed direction) of the body in the clamp section. | |
Adjust the position to start gluing on the body. | |
Adjust the position to finish gluing on the body. | |
Adjust the position of the lead edge of the left cover sheet for the body. | |
Adjust the trimming width of the right cover sheet for the body. | |
Adjust the alignment width of the top and bottom sides of the cover. | |
Adjust the spine form. When binding with Perfect Binder PB-503, you can set whether the spine is square or rounded by adjusting the amount of force applied when forming the spine. | |
Adjusts the temperature of the glue tank and application roller to finish the printed material when binding with Perfect Binder PB-503. |