[Lock/Delete Mode Memory]

[Copy Mode Memory]

Locks or unlocks to prevent [Copy Mode Memory], [Scan Mode Memory], and [Store Mode Memory] registered by the program function from being deleted.

You can also delete the unlocked program.

For details about the program function, refer to Mode Memory.

[Scan Mode Memory]

[Store Mode Memory]

[Change Restrict Setting]

[Change Address Registration]

Configure settings related to the [Scan Address Register] operation by the user.

If [Restrict] is selected, [Scan Address Register] on the [UTILITY] screen is inactive and cannot be selected.

For details about [Scan Address Register], refer to [Scan Address Register].

[Change Set Zoom]

Configure settings to change the enlargement ratio and reduction ratio selected in [Zoom].

If [Restrict] is selected, you cannot change the enlargement ratio and reduction ratio in [Zoom].

For details about [Zoom], refer to [Set Zoom Ratio Setting].

[Scan Restriction Setting]

[E-mail]

Configure settings to send scan data for each destination type.

Allows sending scan data for items specified in [Allow].

If [Restrict] is selected, you cannot select the destination on the [SCAN] screen.

[HDD]

[FTP]

[SMB]

[WebDAV]

[Queue]

[USB Flash Drive]

[Manual Setting]

[Function Usage Restriction]

[Sample Print]

Configure settings related to the use of sample output by the user. If [Restrict] is set, the sample print function becomes unavailable.

For details about [Sample Print Set.], refer to [Sample Print Set.].

[USB Direct Print]

Configure the setting to allow the use of [USB Direct Print]. If [Restrict] is set, you cannot output the data saved on a USB flash drive.

USB Direct Print is a function that outputs the data saved on a USB flash drive. For details, refer to Setting Procedure (Outputting Data on USB Flash Drive).