[Front & Back Density]

Set the transfer output voltages at the lead edge and rear edge when outputting.

[Toner Density Sensor Speed]

Automatically re-adjust the toner density control threshold of Mid High Speed, Medium Speed, and Low Speed.

[Maximum Density Adjustment]

Perform [Maximum Density Adjustment].

[1st Trans. Dis-elec. Output]

Set the neutralization voltages of yellow, magenta, cyan, and black of the 1st transfer belt.

[Max. Density Auto Adj.]

Perform [Max. Density Auto Adj.].

[Develop AC Bias Fine Adj.]

Adjust the development AC bias for yellow, magenta, cyan, and black individually.

[Develop AC Freq. Fine Adj.]

Adjust the development AC bias frequency for yellow, magenta, cyan, and black individually.

[Granularity Setting]

Set the granularity priority level to adjust development conditions.

[Development Output Fine Adj.]

Set the transfer output voltages at the lead edge and rear edge when outputting.

[RGB Uniformity Adjustment]

Adjust the RGB evenness.