[ADF Frame Erase]
Overview
Configure the settings for erasing (frame erasing) images located at the top, bottom and on both sides of the document when scanning the document using ADF.
If you want to erase, set the width to be erased (same width on all four sides).
Tips
- The Frame Erase function used at the time of scanning the document using Original glass can be configured using [FrameCenterErase] option on [COPY] or [SCAN]. For details, refer to [FrameCenterErase].
Setting Items
Setting item | Description |
|---|---|
[None] | Does not use this function. |
[1mm] to [5mm] | Erases all the margin areas at the top, bottom, left, and right of the original with the specified width. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.