[RAW Port Number]

Set the port number of the RAW port.

Up to 6 port numbers, [Port 1] to [Port 6], can be registered.

Tips

• This function is available when you use PullPrint from the OpenAPI application or convert print data from IWS.

1

Select the RAW port to set the port number.

The port number of the selected RAW port is displayed in [Job Setting].

2

Enter the port number using the Keypad of the Control panel.

• Range: 1 to 65535

• If [OFF] is set, the selected RAW port is not used.

3

Press [OK].

• Also set another port number as needed. The steps are all the same.