[Add HDD Address]
Overview
Additionally register an HDD destination (box).
Up to 150 destinations can be registered.
Setting Procedure
1
Press [HDD].
2
Press [Add].
3
Enter destination information. To display the text entry screen, press each item.
[Box Number]: Enter the box number (000000001 to 999999998).
[Register Name]: Enter the destination name. The registered name is displayed in the destination list. Up to 24 single-byte characters (12 double-byte characters) can be entered. If the registered name is omitted, [Box Number] is registered as the registration name.
[Reference Name]: Enter text to search for a destination. Up to 24 single-byte characters (12 double-byte characters) can be entered.
[Password]: Enter the password. Up to 8 single-byte characters can be entered.
4
Set [Main].
If this option is set, you can extract the destination using the [Main] key when sending scan data.
The [Main] key is only available when you register a destination from [Scan Address Register] in [Administrator Setting].
5
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.