[SSFC+Type A]
Overview
Configure settings when [SSFC+Type A] is selected in [IC Card type setting].
This function supports a high degree of security, such as controlling this system synchronously with the access control function.
Tips
Refer to the following when setting [Security Level].
- Level 1: Only authenticate with ID of IC card and allow use of equipment
- Level 2: Check Level 1 Certification and IC Card Entry Information and allow use of equipment
- Level 3: Send INDEX signals to the system of the surveillance camera in addition to Level 1, Level 2
Setting Items
Setting item | Description | ||
|---|---|---|---|
[Write Authentication Result] | [ON] | Records IC card authentication results in the system. Set to [ON] if you are centrally managing a use of a device with the access control or authentication function using a single IC card. | |
[OFF] | Does not record authentication results. | ||
[Writing Time Out] | Set the time (seconds) until the timeout when writing the authentication result record. Enter using the Keypad of the Control panel. Range: 1 sec. to 40 sec. | ||
[Company Code]* | Character keys | Enter the [Company Code] specified in the security system under the usage environment of this system. | |
[Undo] | Collectively deletes the entered characters. | ||
[Company Identification Code]* | Code No. key | Character keys | Enter the [Company Identification Code] specified in the security system under the usage environment of this system. |
[Undo] | Collectively deletes the entered characters. | ||
[Area No.]* | Enter the [Area No.] specified in the security system under the usage environment of this system using the Keypad on the Control panel. The numeric value entered in [Job Setting] is displayed. Range: 0 to 65535 | ||
[Building No.]* | Enter the [Building No.] specified in the security system under the usage environment of this system using the Keypad on the Control panel. The numeric value entered in [Job Setting] is displayed. Range: 0 to 65535 | ||
[Floor No.]* | Enter the [Floor No.] specified in the security system under the usage environment of this system using the Keypad on the Control panel. The numeric value entered in [Job Setting] is displayed. Range: 0 to 65535 | ||
[Room No.]* | Enter the [Room No.] specified in the security system under the usage environment of this system using the Keypad on the Control panel. The numeric value entered in [Job Setting] is displayed. Range: 0 to 65535 | ||
[Security Level]* | Enter the [Security Level] specified in the security system under the usage environment of this system using the Keypad on the Control panel. The numeric value entered in [Job Setting] is displayed. Range: 0 to 65535 | ||
*: For details about the setting items, contact your security representative.
in the upper-right of a page, it turns into 
and is registered as a bookmark.