Configure settings to automatically adjust the date and time of this system using NTP (Network Time Protocol).
Setting item | Description | |
---|---|---|
[ON] | Uses time correction. | |
[OFF] | Does not use time correction. | |
[Auto IPv6 Retrieval] | Configure settings to acquire IPv6 address automatically. | |
[Set Date] | Connects to the NTP server, and adjusts the date and time of this system. | |
[Host Address] | [Input Host Name] | Sets the host name of the host address that communicates with this system. Up to 253 single-byte characters can be entered, including periods. If entering 64 or more single-byte characters, it is necessary to separate them using periods (.). |
[IPv4 Address Input] | Sets the IPv4 address. Range: (0 to 255).(0 to 255).(0 to 255).(0 to 255) | |
[IPv6 Address Input] | Sets the IPv6 address. Range: 1 byte to 39 bytes | |
[Port Number] | Sets the port number used for communication with the NTP server. Enter the port number using the Keypad of the Control panel. Range: 1 to 65535 | |
[Auto Time Adjustment] | Configure settings to automatically correct the time. | |
[Polling Interval] | Set interval for date/time adjustment by regularly connecting to NTP server. Sets interval for date and time adjustment by regularly connecting to NTP server using the Keypad of the Control panel. Range: 1 hour to 240 hours |