[HDD Encryption Set.(UK-301)]
Overview
Set the HDD encryption function of Auto Inspection Unit UK-301.
Using the HDD encryption function encrypts all jobs in the HDD of Auto Inspection Unit UK-301, and protects data.
NOTICE
All the following options are required to use this function.
- Intelligent Quality Care Unit IQ-501
- Auto Inspection Unit UK-301
- Video Interface Kit VI-514
- Video Interface Kit VI-515
NOTICE
- This function is available when no reference image exists.
- If this setting is enabled while a reference image or an automatic inspection report that is not created exists, this system may not run normally, for example, the system may freeze while the "Please wait" screen is displayed.
Reference
- For details about how to enter characters, refer to Entering Text.
Setting Items
Setting item | Description |
|---|---|
[ON] | Uses the HDD encryption function. If [ON] is selected, set the password. |
[OFF] | Does not use the HDD encryption function. |
[Current Password] | Enter the currently registered password. To set the password, select [ON]. Default: 12345678 |
[New Password] | Enter a new password. Number of characters that can be entered: 8 to 32 single-byte characters |
[Input Confirmation] | To confirm the password you entered in [New Password], enter the same password again. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.