Make various adjustments of Large Capacity Stacker LS-507.
Arrange the finishing of printouts by adjusting the alignment plate of the Stacker tray.
Screen access
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Stacker Adjustment]
Setting item | Description |
---|---|
Adjust the alignment plate position in front of the crosswise direction of the Stacker tray to eliminate misalignment or distortion of the output paper. | |
Adjust the alignment plate position in the back of the crosswise direction of the Stacker tray to eliminate misalignment or distortion of the output paper. | |
Adjust the edge stopper position of the Stacker tray to eliminate misalignment or distortion of the output paper. |