Configure settings for SSL encryption communication that is used during communication with OpenAPI.
The following settings are required to use this function.
Setting item | Description | ||
---|---|---|---|
[SSL Setting] | [Non-SSL Only] | Allows OpenAPI communication only when the SSL communication setting is disabled. | |
[SSL Only] | Allows OpenAPI communication only when the SSL communication setting is enabled. | ||
[SSL/Non-SSL] | Allows OpenAPI communication when the SSL communication setting is enabled and disabled. | ||
[Port No.] | [Input] | Sets the port number of this system to communicate via OpenAPI. Enter using the Keypad of the Control panel. Range: 1 to 65535 | |
[Port Number (SSL)] | [Input] | Set number of port of system used in communication with OpenAPI when SSL is enabled. Enter using the Keypad of the Control panel. Range: 1 to 65535 | |
[Client Certificate] | [Enable] | Requests the certificate to the client connected to this system when establishing SSL communication. | |
[Invalid] | Does not request the certificate to the client connected to this system when establishing SSL communication. | ||
[Certificate Verification Level Settings] | [Expiration Date] | [Confirm] | Checks whether the certificate has expired when establishing SSL communication. |
[Do Not Confirm] | Does not check whether the certificate has expired when establishing SSL communication. | ||
[Key Usage] | [Confirm] | Checks whether the certificate is used according to the intended usage approved by the certificate issuer when establishing SSL communication. | |
[Do Not Confirm] | Does not check whether the certificate is used according to the intended usage approved by the certificate issuer when establishing SSL communication. | ||
[Chain] | [Confirm] | Checks whether there are any problems in the certificate chain (certificate path) when establishing SSL communication. To confirm the chain, refer to the external certificate managed in the system. | |
[Do Not Confirm] | Does not check whether there are any problems in the certificate chain (certificate path) when establishing SSL communication. | ||
[Expiration Date Confirmation] | [Confirm] | Checks whether the certificate is lost when establishing SSL communication. | |
[Do Not Confirm] | Does not check whether the certificate is lost when establishing SSL communication. | ||
[CN] | [Confirm] | Checks whether the CN (Common Name) of the certificate matches the server address when establishing SSL communication. | |
[Do Not Confirm] | Does not check whether the CN (Common Name) of the certificate matches the server address when establishing SSL communication. |