[Context Name Settings]

Set the context name.

Enter the name in [Context Name].

Up to 63 single-byte characters can be entered.

[Discovery User Permissions]

Configure settings to use Discovery User.

[Discovery User Name Settings]

Set the user name for detection.

Enter the name in [Discovery User Name].

Up to 32 single-byte characters can be entered.

[Discovery User Name Settings] cannot be specified using the same string as [Read User Name Settings] or [Write User Name Settings].

[Read User Name Settings]

Set the read-only user name.

Enter the name in [Read User Name].

Up to 32 single-byte characters can be entered.

[Security Level]

[OFF]

Does not use the SNMP (Simple Network Management Protocol) authentication.

[auth-password]

Authenticates using the Authentication password.

[auth-password/priv-password]

Authenticates using Authentication password and Privacy password.

[Write User Name Settings]

[Write User Name]

Enter the user name of the user who is allowed to read and write.

Up to 32 single-byte characters can be entered.

[Password Setting]

[Read auth]

Sets the read-only Authentication password.

8 to 32 single-byte characters can be entered.

Default: AuthPassword

[Read priv]

Set read-only Privacy password.

8 to 32 single-byte characters can be entered.

Default: PrivPassword

[Write auth]

Set read and write Authentication password.

8 to 32 single-byte characters can be entered.

Default: (MAC address, : is omitted)

[Write priv]

Set read and write Privacy password.

8 to 32 single-byte characters can be entered.

Default: (MAC address, : is omitted)

[Encryption Algorithm]

[DES]

Select the encryption algorithm used for the SNMP (Simple Network Management Protocol) authentication.

[AES-128]

[Authentication Algorithm]

[MD5]

Select the authentication algorithm used for the SNMP (Simple Network Management Protocol) authentication.

[SHA-1]