Administrator Setting | What Is [Staple Finisher(Fold) Adj.]?

What Is [Staple Finisher(Fold) Adj.]?

Make various adjustments for Saddle Stitcher SD-510 mounted on the finisher.

Arrange the finishing of printouts by adjusting functions such as Fold & Staple, Half-Fold, and Tri-Fold.

NOTICE

The following option is required to use this function.

Screen access

Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Fold) Adj.]

Setting item	Description
[Fold&Staple Paper Width Adj.]	Adjust the width of the horizontal alignment plate that aligns a paper stack of the stapler to reduce misalignment or deflection of the paper for Fold & Staple.
[Fold&Staple Pitch Adjustment]	Adjust the staple pitch when stapling for Fold & Staple.
[Fold&Staple Fold Position]	Adjust the fold position for Fold & Staple.
[Fold&Staple Staple Position]	Adjust the misalignment between the half-fold position and staple position when performing Fold & Staple.
[Half-Fold Fold Position Adj.]	Adjust the half-fold position for Multi Half Fold.
[Tri-Fold Adjustment]	Adjust the tri-fold function for Saddle Stitcher SD-510 mounted on the finisher.
[Half-Fold Strength Adj.]	Adjust the roller pressing time when performing Fold & Staple or Multi Half Fold.