[ISW]
Overview
Allow overwriting of firmware and checking of the current version.
ROM (program and data) saved on flash memory and SSD installed on this system and in various options is forwarded to a USB flash drive for overwriting.
NOTICE
The following settings are required to use this function.
- Set [Enhanced Security Mode] to [ON].
Tips
A USB flash drive with the ROM file recorded is required to use this function.
- For details on ROM, contact your service representative.
Reference
- For details about [Enhanced Security Mode], refer to [Enhanced Security Mode].
Setting Procedure
Rewrite the firmware.
1
Select [USB Flash Drive ISW].
[Division]: Displays ROM category.
[Version]: Displays the current firmware version.
[ISW Object]: Select the ISW applicable key for overwriting. When [Package(I0)] is selected, everything is subject to overwriting.
[Internet ISW]: Overwrites data through the Internet. For details on overwriting with [Internet ISW], contact your service representative.
2
Select the ISW applicable key for overwriting.
The setting screen is displayed.
3
Select file and press [OK].
Press [Limit] to only display the files with a BIN extension, or ROM files compatible with the device destination.
4
Press [Start].
A dialog is displayed when overwriting is complete.
5
Press [End].
System reboots automatically.
6
When performing sequential overwriting, select [Continue].
in the upper-right of a page, it turns into 
and is registered as a bookmark.