[Max.Search Results]

Sets the maximum number of addresses that are displayed as the search result.

Enter using the Keypad of the Control panel.

Range: 5 to 100 items

[Timeout]

Set the timeout to limit a connection with the LDAP server.

Enter using the Keypad of the Control panel.

Range: 5 sec. to 300 sec.

[Initial Setting for Search Details]

[Name]

Set the default filtering conditions to make an LDAP search.

Select one of the following options in each item.

• [OR]

• [AND]

• [STARTS WITH]

• [ENDS WITH]

[E-Mail]

[Dial Number]

[Last Name]

[First Name]

[City]

[Company Name]

[Department]

[Server Address]

[Input Host Name]

Set the host name of the LDAP server.

Up to 253 single-byte characters can be entered, including periods.

If entering 64 or more single-byte characters, it is necessary to separate them using periods (.).

[IPv4 Address Input]

Sets the IPv4 address.

Range: (0 to 255).(0 to 255).(0 to 255).(0 to 255)

[IPv6 Address Input]

Sets the IPv6 address.

Range: 1 byte to 39 bytes

[Search Base]

Sets the search starting point to search for the authenticated user.

A search is made, including the tree structure under the specified starting point.

Up to 255 single-byte characters can be entered.

Enter the example: "cn=users,dc=example,dc=com"

[SSL Setting]

[ON]

Uses SSL.

[OFF]

Does not use SSL.

[Port Number]

Sets the port number of the LDAP server.

Press [Input], and enter it using the Keypad on the Control panel.

Range: 1 to 65535

[Port Number (SSL)]

Set the port number for SSL communication via the LDAP server.

Press [Input], and enter it using the Keypad on the Control panel.

Range: 1 to 65535

[Certificate Verification Level Settings]

[Expiration Date]

Checks whether the certificate has expired when verifying the certificate during SSL communication.

[Key Usage]

Checks whether the certificate is used according to the intended usage approved by the issuer of the certificate.

[Chain]

Checks whether there are any problems in the certificate chain (certificate path). To confirm the chain, refer to the external certificate managed in the system.

[Expiration Date Confirmation]

Checks whether the certificate has expired.

[CN]

Checks whether the CN (Common Name) of the certificate matches the server address.

[Authentication Type]

[Anonymous]

Selects the authentication format when connecting to the LDAP server.

[Simple]

[Digest-MD5]

[GSS-SPNEGO]

[NTLM v1]

[NTLM v2]

[Select Server Authentication Method]

[Use Settings]

Uses the setting value of [Login Name], [Password], or [Domain Name].

[Dynamic Authentication]

Username and password are required when performing a LDAP search.

This item is not selectable when [Authentication Type] is set to [Anonymous].

[Referral Setting]

[ON]

Uses the referral function.

[OFF]

Does not use the referral function.

[Login Name]*

Set the user name required to log in to the LDAP server.

Up to 255 single-byte characters can be entered.

[Password]*

Set the password when using the LDAP server.

Up to 128 single-byte characters can be entered.

[Domain Name]

Sets the domain name to use the LDAP server.

Up to 64 single-byte characters can be entered.

[Check Connection]

Checks connection with LDAP server.

This is displayed if [Enabling LDAP] is set to [ON].

[Reset All Settings]

Returns all settings to their defaults.