Administrator Setting | [Add FTP Address]

[Add FTP Address]

Additionally register an FTP destination (FTP server).

Up to 150 destinations can be registered.

Press [FTP].

Press [Add].

Enter destination information. To display the text entry screen, press each item.

[Register Name]: Enter the destination name. The registered name is displayed in the destination list. Up to 24 single-byte characters (12 double-byte characters) can be entered.
[Reference Name]: Enter text to search for a destination. Up to 24 single-byte characters (12 double-byte characters) can be entered.
[Host Address]: Enter the address of the FTP server. Up to 253 single-byte characters can be entered.
[File Path]: Enter the file path of the FTP server. Up to 127 single-byte characters (63 double-byte characters) can be entered.
[Login Name]: Enter the account name of the FTP server. Up to 32 single-byte characters can be entered.
[Password]: Enter the password for the FTP server. Up to 32 single-byte characters can be entered. The entered password is shown by "*".
[Anonymous]: Set this item when registering an FTP server (Anonymous FTP) that does not require an account to log in.
[Port No.]: Enter the port number used for the FTP server using a 5-digit number (00001 to 65535).
[Proxy]: Configure a setting to use a proxy server. If the destination is an external server, select [ON]. To use the server, be sure to set [FTP TX Settings] to [ON]. For details about [FTP TX Settings], refer to [FTP TX Settings].

Set [Main].

If this option is set, you can extract the destination using the [Main] key when sending scan data.
The [Main] key is only available when you register a destination from [Scan Address Register] in [Administrator Setting].

Press [OK].