Set the address of the syslog server to send audit logs.
The following setting is required to use this function.
Setting item | Description | |
---|---|---|
[Audit Log Trans.] | [ON] | Sends audit logs. |
[OFF] | Does not send audit logs. | |
[Communication Protocol] | [LDP] | Set the protocol used for the syslog server. |
[TCP] | ||
[TLS] | ||
[Host Address] | Character keys | Enter the address of the syslog server. Up to 253 single-byte characters can be entered. |
[Del] | When there is no character at the cursor position, the character directly to the left of the cursor is deleted. If the cursor is on a character, that character is deleted. | |
[Shift] | Switches between uppercase and lowercase characters, or numbers and symbols. | |
[Space] | Inserts a space. | |
[Port No.] | Keypad | Enter the port number used for the syslog server. Range: 00001 to 65535 |
[Clear] | Returns the entered numeric value to the default. |