Set IPSec policy for each group.
You can set the group name or IP packet operation for each group.
Setting item | Description | |
---|---|---|
[ON] | Use currently selected [Group] as IPsec policy. | |
[OFF] | Does not use currently selected [Group] as IPsec policy. Also, if selected, the currently selected [Group] is deleted. | |
[Group Name] | Set the group name used for the encrypted communication. Up to 10 single-byte characters can be entered. (Excluding double quotation mark ") | |
[action] | [Protected] | Protects IP packet that matches the conditions. |
[Allow] | Passes IP packet that matches the conditions. | |
[Deny] | Destroys IP packet that matches the conditions. | |
[Select Group] | [Peer] | Select the [Peer] to set in [IPsec Policy]. |
[Protocol] | Select the [Protocol] to set in [IPsec Policy]. | |
[IPsec Setting] | Select the [IPsec Setting] to set in [IPsec Policy]. |
[Group Name] registered in [Peer] is displayed (the screen is an example).
[Group Name] registered in [Protocol Setting] is displayed (the screen is an example).
[Group Name] registered in [IPsec SA Settings] is displayed (the screen is an example).