[Print Job JAM Setting]
Overview
Make settings to stop the machine when mis-centering is detected.
Make further settings to display the reason/cause when the machine stops.
NOTICE
The following setting is required to use this function.
- Set [Mis-centering Detect JAM] of [Paper Setting] to [Detect].
Reference
- For details about [Mis-centering Detect JAM], refer to [Expert Adj.].
Setting Items
Setting item | Description |
|---|---|
[Mis-centering JAM Setting] | Set the operation when it detects paper mis-centering. If mis-centering of 5 mm / 0.2" or more is detected, the system can be stopped with reason of paper jam. |
[JAM Identification Display] | Set the display of the cause when the machine stops. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.