Configure settings to scan data using the Web service.
Setting item | Description |
---|---|
[ON] | Uses scanning in Web service. |
[OFF] | Does not use scanning in Web service. |
[Scanner Name] | Sets the scanner name of the target Web service. Up to 63 single-byte characters can be entered. |
[Scanner Location] | Sets the location where to install the scanner of the target Web service. Up to 63 single-byte characters can be entered. |
[Scanner Information] | Sets any information about the scanner of the target Web service. Up to 63 single-byte characters can be entered. |
[Connection Timeout] | Set the timeout period. If the timeout period is set, when the specified time period elapses without any operations being carried out while connected to the Web service, the connection is interrupted. Enter using the Keypad of the Control panel. Range: 30 sec. to 300 sec. |