[Administrator Password]

Specify the administrator password. 8 to 64 single-byte characters can be entered.

To maintain security, change the administrator password on a regular basis.

NOTICE

• Remember the password you set. By chance if you forget the password, contact service representative.

NOTICE

The following setting is required to use this function.

• Set the administrator authentication function to ON.

Tips

• The [Administrator Password] of [Security Setting] can be changed when the administrator authentication function is set to ON. For details about the administrator authentication function, contact your service representative.
• In [Quick Security Setting], the administrator password can be specified or changed regardless of whether the administrator authentication function is set to ON or OFF. If the administrator password is set to ON, the administrator authentication function is synchronously set to ON. For details about the administrator password of [Quick Security Setting], refer to [Administrator Password].

Reference

• For details about how to enter characters, refer to Entering Text.