[Erase Operation Setting]
Overview
Configure detailed settings for when [NoImageAreaErase] is selected using [Application] provided on [COPY] and [SCAN] screens.
Tips
- If [Auto] is selected, a margin may not be erased correctly depending on the original. In such a case, manually select [Erase Mode] and [Original Density].
- If the original is detected as a smaller one than the actual, set [Original Density] to [Dark] or [Dark+].
- If the original is detected as a larger one than the actual, set [Original Density] to [Light] or [Light+].
Setting Items
Setting item | Description | |
|---|---|---|
[Erase Mode/Orig. Density] | [Auto] | Automatically sets [Erase Mode] and [Original Density]. |
[Erase Mode] | [Oblique Erase] | Sets area as document area without including shadow of the paper and erases the outside area. |
[Rectangle Erase] | Sets area as document area, including shadow of the paper and erases the outside area. | |
[Original Density] | [Dark+] | Selects [Original Density] from 5 stages, if [Oblique Erase] or [Rectangle Erase] are selected. |
[Dark] | ||
[Normal] | ||
[Light] | ||
[Light+] | ||
in the upper-right of a page, it turns into 
and is registered as a bookmark.