[PING Confirmation]
Overview
Use ping to verify that the device that communicates with this system is properly connected.
Setting Procedure
1
Set [Host Address].
[Input Host Name]: Set the host name. Up to 253 single-byte characters can be entered, including periods. If entering 64 or more single-byte characters, it is necessary to separate them using periods (.).
[IPv4 Address Input]: Set the IPv4 address. Range: (0 to 255).(0 to 255).(0 to 255).(0 to 255)
[IPv6 Address Input]: Set the IPv6 address. Range: 1 byte to 39 bytes
2
Press [Check Connection] to check the connection.
Check the result.
3
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.