[Status Notification Setting]
Overview
Configure settings to notify the specified address of an error when an error such as a paper jam occurs on this system.
Setting Procedure ([Register Notification Address] - [IP Address 1])
Set the destination IP address for notifications.
Setup method of [IP Address 1] to [IP Address 5] is save.
1
Select the IP address to set.
2
Press [ON].
3
Set [Host Address].
[Input Host Name]: Set the host name. Up to 253 single-byte characters can be entered, including periods. If entering 64 or more single-byte characters, it is necessary to separate them using periods (.).
[IPv4 Address Input]: Set the IPv4 address. Range: (0 to 255).(0 to 255).(0 to 255).(0 to 255)
[IPv6 Address Input]: Set the IPv6 address. Range: 1 byte to 39 bytes
4
Enter [Port Number].
Enter the port number using the Keypad of the Control panel. Range: 1 to 65535
5
Enter [Community Name].
Up to 15 single-byte characters can be entered.
6
Set [Notification Items].
7
Press [OK].
Setting Procedure ([Register Notification Address] - [E-mail 1])
Set the destination email address for notifications.
Setup method of [E-mail 1] to [E-mail 5] is save.
1
Select set email address.
2
Press [ON].
3
Press [Edit E-Mail Address] and enter email address.
Up to 256 single-byte characters can be entered.
4
Set [Notification Items].
5
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.