1

Left side door

Open when clearing a paper jam or when turning Main power switch ON/OFF.

2

Toner supply door

Open when replacing Toner bottle.

3

Toner supply door handle

Used when opening Toner supply door.

4

Sub power switch

Turns the machine power ON/OFF.

5

Waste toner box replacement door

Open when replacing Waste toner box.

6

Touch panel

Displays the screens such as the [MACHINE] screen, and set up operations. Also, displays the operation method and method for handing problems.

7

Control panel

Press when operating and setting up.

8

Working Table WT-518 (optional)

Mount the Control panel.

9

USB port (USB 2.0 Type A e 3)

Used when connecting external memory media (USB flash drive, USB-HDD), keyboard, mouse, Authentication Unit AU-201S, Intelligent Media Sensor IM-101, etc.

USB port (USB 2.0 Type A e 3) supports low power devices only. Please provide an external supply of power for devices that require a large amount of power.

10

Serial port (RS-232C)

Port for customer engineer (CE) only.

11

Network port (10BASE-T, 100BASE-TX, 1000BASE-T)

Connects an Ethernet cable to operate the system and uses as a network scanner.

12

USB port (USB3.0/2.0 TypeA e 1)

Used when connecting external memory media (USB flash drive, USB-HDD), keyboard, mouse, Authentication Unit AU-201S, Intelligent Media Sensor IM-101, etc.

USB port (USB 3.0/2.0 TypeA e 1) supports low power devices only. Please provide an external supply of power for devices that require a large amount of power.

13

Image Controller connection port

Used when mounting all the Image Controller.

14

Video Interface Kit connection port

Used when mounting Image Controller or Video Interface Kit VI-515 (option).

* Video Interface Kit VI-515 (optional) is required to connect the Image Controller manufactured by EFI or Creo and the machine using a cable.

15

Cyclone Box

Reduces toner scattering in the machine.

Access the Cyclone Box from within the paper feeder unit.

16

Image Controller IC-610

This system can be used as a printing system.

17

Machine Connection Port

Connect to the machine.

18

USB port (USB3.0/2.0 TypeA e 1)

Used when connecting external memory media (USB flash drive, USB-HDD) and others.

19

Network port (10Base-T, 100Base-TX, 1000Base-T)

Connects an Ethernet cable to operate the Image Controller, and uses as a network printer.

20

USB port (USB2.0 Type B e 1)

Connects machine to computer using a USB cable and uses as a local printer (Local Interface Kit EK-612 only).

21

Power switch

Turns the Image Controller power ON/OFF.

22

Heater switch

Switch Paper Feeder Unit PF-712 / Paper Feeder Unit PF-713 heater ON/OFF.

23

Power cord

Supplies power to machine.

24

Ozone filter

Recovers ozone generated inside the machine.

25

Lock release lever

When clearing a paper jam, push the lever to the back, open the guide downward, then remove the paper.

Access Lock release lever from within the options on the left.