[Half-Fold Strength Adj.]
Overview
Adjust the roller pressing time when performing Fold & Staple or Multi Half Fold.
Make this adjustment when a booklet is not folded securely. However, if the pressing time is lengthened, productivity decreases.
Setting Procedure
1
Press [Print Mode].
2
Load the desired paper into a paper tray, and select that paper tray.
[Output Setting] is automatically set to [Fold&Staple].
3
Press Start on the Control panel.
A sample is output.
4
Check the folding strength of the output paper.
5
If any adjustments are required, press [Exit PrintMode] to return to the setting screen.
6
Use the on-screen keypad to enter the numeric value.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:0~+10 1step = 1sec]
7
Repeat steps 1 to 6 until the desired result is obtained.
in the upper-right of a page, it turns into 
and is registered as a bookmark.