[Main ScanDir.Zoom Auto(Back)]

Automatically adjust the magnification in the main scanning direction (crosswise direction) of the back side when using the ADF.
Scanning accuracy is maintained by making regular adjustments.

NOTICE

To make correct adjustments, configure the following setting in advance.

• Perform [CD-Mag. Adjustment] in [Printer Adjustment].

Reference

• For details about [CD-Mag. Adjustment] in [Printer Adjustment], refer to [CD-Mag. Adjustment].

1

Press [Print Mode].

2

Load a test chart into the ADF tray with the back side facing up, and press Start on the Control panel.

3

Automatic adjustment is performed, and [Adjustment Result] is displayed.

• If adjustment fails, [NG] is displayed in [Adjustment Result]. Make adjustments with [Main Scan Dir. Zoom(Back)].

4

Check that [Adjustment Result] is [OK], and press [Set].

• The numeric value of [Magnification Adj.(%)] is reflected on [Current Data].