[FD-Mag. Auto Adjustment]

Automatically adjust the magnification in the paper feed direction when using the ADF.

Scanning accuracy is maintained by making regular adjustments.

NOTICE

The following setting is required to use this function.

• Perform [FD-Mag. Adjustment] in [Printer Adjustment].

Reference

• For details about [FD-Mag. Adjustment] in [Printer Adjustment], refer to [FD-Mag. Adjustment].

1

Press [Print Mode].

2

Place a test chart in the ADF tray, and press Start on the Control panel.

• Load the test chart with the front side facing upward.

3

Automatic adjustment is performed, and [Adjustment Result] is displayed.

• If adjustment fails, [NG] is displayed in [Adjustment Result]. Make adjustments with [FD-Mag. Adjustment].

4

Check that [Adjustment Result] is [OK], and press [Set].

• The numeric value of [Magnification Adj.(%)] is reflected on [Current Data].