[Flattening a Fold (Freq.)]

Adjust the number of back-and-forth motions of the roller when forming the spine of a Fold & Staple book.

Make this adjustment when there is a problem with the form of the spine.

1

Press [Print Mode].

2

Load A3 w or 11 e 17 w paper into any paper tray, and select that paper tray.

3

Press Start on the Control panel.

A sample is output.

4

Check the spine of the output booklet.

5

If any adjustments are required, press [Exit PrintMode] to return to the setting screen.

6

Use the on-screen keypad to enter the numeric value.

• Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].

• [Adj. Range:-5~+5 1step = 1]

7

Repeat steps 1 to 6 until the desired result is obtained.