[Gripper Operation Adj.]
Overview
Adjust the timing to hold the rear edge of the paper with the gripper.
NOTICE
One of the following options is required to use this function.
- Finisher FS-541
- Output Tray OT-512
Tips
- If a numeric value is entered in [Offset for All Weight], it is applied to all the paper sizes. If a numeric value is entered for a specific paper size, the setting value becomes the sum of the entered value of the specific paper size and the entered value of [Offset for All Weight].
Setting Procedure
1
Press the selection key of the paper weight to adjust.
2
Use the on-screen keypad to enter the numeric value.
To change [Current Data], use [+ / -] to select the plus or minus of the numeric value, and press [Set].
Timing to hold the rear edge of the paper: (-) Fast (+) Slow
[Adj. Range:-20~+20 1step = 1ms]
in the upper-right of a page, it turns into 
and is registered as a bookmark.