[FD-Mag. Auto Adj.(Back)]

Automatically adjust the magnification in the paper feed direction of the back side when using the ADF.

Scanning accuracy is maintained by making regular adjustments.

NOTICE

The following setting is required to use this function.

• Perform [FD-Mag. Adjustment] in [Printer Adjustment].

Reference

• For details about [FD-Mag. Adjustment] in [Printer Adjustment], refer to [FD-Mag. Adjustment].

1

Press [Print Mode].

2

Load the test chart used with [FD-Mag. Adjustment] into the ADF tray with the back side facing up, and press Start on the Control panel.

3

Automatic adjustment is performed, and [Adjustment Result] is displayed.

• If adjustment fails, [NG] is displayed in [Adjustment Result]. Make adjustments with [FD-Mag. Adjustment(Back)].

4

Check that [Adjustment Result] is [OK], and press [Set].

• The numeric value of [Magnification Adj.(%)] is reflected on [Current Data].